|
Who's Online
Number Online:
Anonymous:2
Members: 0
Total: 2
Members Online:
|
How to Caulk Indoors
Application Steps to Caulking Indoors
|
- Clean area with warm water—do not use soap. Remove existing caulk, loose paint, dirt, mold, mildew, and anything that may reduce adhesion.
- Cut the caulk tube at a 45°angle to create an applicator tip. Cut tip to create a 1/8" to 3/8" bead. Remember, caulk shrinks as it dries.
- Surface must be dry and air and surface temperatures must be at least 65°F for 24 hours after application.
- Apply using a caulk gun with a continuous, even pressure. Hold the caulk gun at a 45°angle, pulling toward you, pushing the bead into the gap. Start at a corner and apply in one continuous, consistent bead to the next corner.
|
Caulking Finishing Steps
|
- Smooth, or "tool",the bead to a concave shape using a caulk finishing tool or wet fingertip. Be careful only to shape the bead—not removeit!
- Allow to dry before priming or painting; check label for proper cure.
|
|
| CAULK TUBE TIP ENLARGED CROSS-SECTION |
 |
| PROPER ANGLE & DIRECTION TO CAULK |
 |
|
| Gardner-Gibson manufactures and distributes roof coatings, driveway sealers, caulks and adhesives. Products are marketed under the brands APOC, Black Jack, Sta-Kool, Gardner, Shur-Stik, Fields, ATCO and SMART brands. For more information, visit www.gardner-gibson.com. |
Posted on May 28, 2009 02:05 | (DIY) Do-It-Yourself
|
Home Improvement Ads/Links
Site Sponsors
|
